M-2.5 Supercritical CO₂ Extractor

Part Number: #10-0145 (208-230V) | #10-0146 (380V)

Develop extraction methods on a compact 2.5 L platform. The M-2.5 supports subcritical and supercritical CO₂ extraction for R&D and small-batch work, with touchscreen logging of temperature and pressure and optional co-solvent hardware.

2.5 L extraction, collection and CO₂ recycle vessels
800–5,000 psi operating pressure; −10 to 100°C temperature range
Top and bottom vessel access for cleaning and changeover

Approved operating limits are configuration-specific. Pump, chiller and table pictured are sold separately.

Talk to an Expert | Request a Quote

Request M-2.5 brochure

Features and Benefits
Specifications
Why Buy the 2.5?
R&D Customization Options

M-2.5 FEATURES AND PROCESS CONTROL

Document the method:

Touchscreen HMI
Temperature and pressure logging
Recorded conditions as a development reference
Positive-displacement flow control

CO₂ capability:

Subcritical and supercritical CO₂ extraction
Optional secondary co-solvent pump where specified
Temperature range: −10 to 100°C
Operating pressure: 800–5,000 psi

Vessel access:

Top and bottom vessel accessibility
Access supports cleaning and changeover between development runs

Specify the operating configuration:

Approved operating limits are configuration-specific
Use the specified limits, interlocks and utilities for the equipment configuration

OPTIONAL R&D FEATURES:
Secondary co-solvent pump, detector, larger column, solvent-ratio control and data-transmit module. A mobile table and control/data upgrades are specified separately.

PACKAGE AND WARRANTY:
A 1 hp chiller is required and sold separately. Pump, chiller and table pictured are sold separately. Warranty: 12 months, parts and workmanship. Confirm the complete package scope in your quotation.

OPERATING LIMITS:
Approved operating limits are configuration-specific. Operate within the specified limits, interlocks and utilities for your configuration. Throughput depends on feed material and extraction method; vessel volume is not a daily-output rating.

M-2.5 technical specifications

Extraction / collection / recycle vessels	2.5 L each
Operating pressure	800–5,000 psi
Temperature range	−10 to 100°C
CO₂ supply inlet	750–850 psi, chilled
Flow control / interface	Positive displacement / touchscreen HMI
Dimensions, L × W × H	48.375 × 31.615 × 40.688 in; without light mast
Unit weight / footprint	804 lb / 10.48 ft²
Electrical	208–230 / 380 VAC; 1 phase; 50/60 Hz; 30 FLA
Wetted materials	304 and 316 stainless steel
Warranty	12 months; parts and workmanship
Required ancillary equipment	1 hp chiller, sold separately
Order codes	#10-0145 (208–230V) / #10-0146 (380V)

Why choose a benchtop extractor? The M-2.5 provides a compact platform for extraction R&D and small-batch method development. Define the feed material, process conditions, collection requirements and analytical endpoint before specifying the system.

A development basis for larger systems. Use the recorded method as a basis for scale-up studies with larger E-series systems. Equipment configuration and performance depend on the material and method; moving from an R&D run to production requires evaluation at the intended scale.

Start with the material and target extract. Specify batch size, extraction conditions, collection requirements and the analytical endpoint. Discuss any feasibility work, installation, training and documentation needed for your project and identify them in the quotation.