CO2 Supply Equipment

CO2 Cage MPCART

The CO2Cage and MPCart are a CO2 supply solution designed to hold your bulk gas or liquefied gas via 16 integrated and manifolded 100 lb DOT-approved gas/liquid cylinders. This is typically used in applications where the installation of refrigerated bulk tanks is not feasible or available. Keep production moving forward with non-stop CO2 Supply.

Talk to an Expert | Request a Quote
CO2 Supply Solutions
co2cage

CO2 Cage

1600 lbs of liquid co2 • contact closure & enclosed system for automated venting • On board CO2 gas monitoring for leaks • integrates with mpcart for constant filling

The CO2Cage is rated for indoor use and is a safe and convenient solution for constant CO2 pressure input levels required for efficient extraction. All tanks are USDOT and TC rated. All applicable standards for use in the United States and Canada under the USDOT PHMSA and Transport Canada Reciprocity Agreement.

Our cylinders are registered and marked with approved DOT specifications and UNISO standards (for example DOT-3AA, DOT-4BA, ISO 9809-1) to be filled, transported and used in Canada, or conversely, registered TC specification cylinders or approved UNISO standards (for example TC-3ALM, TC4BWM, TC-4LM, ISO 7866) to be filled, transported and used in the US.

Learn more about the CO2Cage
mpcart
AttributeValue
Dimensions (in)48 x 18 x 35
Cord Length (ft)120
Inlet (psi)300-350
Fill Hose ConnectionCGA 320
Maximum (RPM)1,750
Single Phase208/240 Volts
Electrical Plug TypeHBL2621S

MPCART

20 lbs/min fill rate • transports liquid co2 more than 100 feet • integrates with CO2 Cage

Mobile or stationary plumbed inline CO2 pump solution. Integrates with the CO2 Cage. When the MP Cart is paired with the CO2 Cage, you get the following advantages:

  • Touchscreen display on equipment HMI panel for easy monitoring and programming
  • Programmed visual and audible alarms and warnings and reports
  • Regulation Compliant
  • Single Inlet and Outlet for fill and use
  • Multi-fill manifold
  • Integrated Scale
  • Designed to be moved with a forklift
  • Design Standard: DOT 3AA / TC3AAM
  • May be filled on-site or off-site according to CGA G6.4_4 and EIGA IGC 83/08E
  • Load the bundle by weight as per CGA method
  • Optional Pump Cart to up your psi for filling the cylinders
Learn more about the Mpcart
resources guide digital ipad print
Request the Hemp Processing Building & Site Guidelines Checklist Check out the FREE Resource Library
schedule jam session